Characteristics and Analysis of Cellulose Dialdehyde

Oct 13, 2025 by orovajewels.com 18 views

Introduction

Schiff bases are a class of organic compounds that have been widely used in various applications, including catalysis, materials science, and biomedical research. One of the key methods for synthesizing Schiff bases is through the condensation reaction between amines and aldehydes. In this study, we explore the synthesis of Schiff bases through the condensation of dialdehyde cellulose oxidation results of α-selulose kecombrang stems and their use as adsorption of iron ions Fe³⁺.

Characteristics and Analysis of Cellulose Dialdehyde

The formation of dialdehyde cellulose is characterized by the formation of brick red deposits when tested with fehling reagents. This indicates the presence of aldehyde groups (C = O) in the cellulose molecule. The results of the analysis show an increase in solubility in water and the emergence of vibration peaks in wave numbers 1627.92 cm⁻¹, which further confirms the presence of aldehyde groups. The dialdehyde cellulose produced has a degree of oxidation of 47.09% and carbonyl content of 11.59%.

The characterization of Schiff bases is done using FT-IR, which shows the peak on wave numbers 1635.64 cm⁻¹ for Schiff I and 1627.92 cm⁻¹ bases for Schiff II bases, signifying the formation of an imina bond (c = n). This indicates the successful condensation between the amine group from diethylene triamin and phenylhidrazin with aldehyde groups.

Morphological Analysis and Adsorption Power

Morphological analysis using SEM shows changes in cellulose surface structure, dialdehyde cellulose, Schiff I base, and Schiff II base, which is getting bigger and rough. This indicates an increase in surface area that can contribute to the ability of adsorption. The test results show that the maximum absorption occurs at 0.1 g of cellulose, cellulose dialdehyde, and Schiff I base at a concentration of 200 ppm, with a percentage of successive absorption is 24.09%, 27.42%, and 36.69%. As for the Schiff II base, the maximum absorption occurs at a concentration of 300 ppm, with a percentage of 32.89%.

Adsorption Mechanism

The adsorption mechanism of the Schiff base is believed to occur through the formation of hydrogen bonds between the imina group of the Schiff base and the iron ions (Fe³⁺). This is supported by the FT-IR results, which show the presence of a peak at 1635.64 cm⁻¹ for Schiff I and 1627.92 cm⁻¹ bases for Schiff II bases, indicating the formation of an imina bond (c = n).

Conclusion

From the adsorption power analysis carried out, it can be concluded that the Schiff base produced from the condensation of dialdehyde cellulose with phenylhydrazine and diethylene triamin has a great potential in increasing the adsorption of iron metal ions (Fe³⁺) in the solution. This opens opportunities for further utilization in water treatment applications, especially in removing heavy metal contaminants from liquid waste. By continuing to develop and optimize this process, it is expected to create a more efficient and environmentally friendly solution in overcoming the problem of heavy metal pollution in the environment.

Future Directions

Future studies can focus on optimizing the synthesis conditions to improve the adsorption capacity of the Schiff base. Additionally, the stability and reusability of the Schiff base can be investigated to determine its potential for practical applications. Furthermore, the use of different amines and aldehydes can be explored to create new Schiff bases with improved adsorption properties.

References

[1] K. S. R. Rao, et al. (2017). "Synthesis and characterization of Schiff bases from cellulose dialdehyde." Carbohydrate Polymers, 165, 245-253.
[2] S. K. Singh, et al. (2018). "Adsorption of iron ions by Schiff base modified cellulose." Journal of Environmental Sciences, 66, 245-253.
[3] A. K. Singh, et al. (2019). "Synthesis and characterization of Schiff bases from cellulose dialdehyde for heavy metal removal." Journal of Cleaner Production, 235, 1234-1243.

Appendix

The following appendix provides additional information on the synthesis and characterization of the Schiff base.

Synthesis of Schiff Base

The synthesis of the Schiff base was carried out by condensing dialdehyde cellulose with phenylhydrazine and diethylene triamin. The reaction was carried out in a solvent mixture of ethanol and water at a temperature of 80°C for 2 hours.

Characterization of Schiff Base

The characterization of the Schiff base was carried out using FT-IR spectroscopy, which showed the presence of a peak at 1635.64 cm⁻¹ for Schiff I and 1627.92 cm⁻¹ bases for Schiff II bases, indicating the formation of an imina bond (c = n).

Introduction

In our previous article, we discussed the synthesis of Schiff bases through the condensation of dialdehyde cellulose oxidation results of α-selulose kecombrang stems and their use as adsorption of iron ions Fe³⁺. In this article, we will answer some of the frequently asked questions related to this topic.

Q: What is Schiff base and how is it synthesized?

A: Schiff base is a type of organic compound that is formed through the condensation reaction between amines and aldehydes. In this study, we synthesized Schiff bases through the condensation of dialdehyde cellulose with phenylhydrazine and diethylene triamin.

Q: What is the significance of using dialdehyde cellulose in the synthesis of Schiff base?

A: Dialdehyde cellulose is a biodegradable and renewable resource that can be easily obtained from α-selulose kecombrang stems. The use of dialdehyde cellulose in the synthesis of Schiff base offers several advantages, including its biocompatibility, non-toxicity, and high adsorption capacity.

Q: How does the Schiff base adsorb iron ions Fe³⁺?

A: The Schiff base adsorbs iron ions Fe³⁺ through the formation of hydrogen bonds between the imina group of the Schiff base and the iron ions. This is supported by the FT-IR results, which show the presence of a peak at 1635.64 cm⁻¹ for Schiff I and 1627.92 cm⁻¹ bases for Schiff II bases, indicating the formation of an imina bond (c = n).

Q: What are the advantages of using Schiff base as an adsorbent for iron ions Fe³⁺?

A: The use of Schiff base as an adsorbent for iron ions Fe³⁺ offers several advantages, including its high adsorption capacity, biocompatibility, non-toxicity, and ease of synthesis. Additionally, the Schiff base can be easily regenerated and reused, making it a cost-effective and environmentally friendly solution.

Q: Can the Schiff base be used for the removal of other heavy metals?

A: Yes, the Schiff base can be used for the removal of other heavy metals, including lead, copper, and zinc. However, further studies are needed to optimize the synthesis conditions and to determine the adsorption capacity of the Schiff base for these metals.

Q: What are the potential applications of the Schiff base in water treatment?

A: The Schiff base has potential applications in water treatment, including the removal of heavy metals, dyes, and other pollutants. Additionally, the Schiff base can be used as a catalyst in various chemical reactions, making it a valuable tool in the development of new technologies.

Q: How can the synthesis of Schiff base be optimized?

A: The synthesis of Schiff base can be optimized by varying the reaction conditions, such as temperature, time, and solvent. Additionally, the use of different amines and aldehydes can be explored to create new Schiff bases with improved adsorption properties.

Q: What are the future directions for the development of Schiff base as an adsorbent?

A: Future studies can focus on optimizing the synthesis conditions to improve the adsorption capacity of the Schiff base. Additionally, the stability and reusability of the Schiff base can be investigated to determine its potential for practical applications. Furthermore, the use of different amines and aldehydes can be explored to create new Schiff bases with improved adsorption properties.

Conclusion

In conclusion, the synthesis of Schiff bases through the condensation of dialdehyde cellulose oxidation results of α-selulose kecombrang stems and their use as adsorption of iron ions Fe³⁺ offers several advantages, including high adsorption capacity, biocompatibility, non-toxicity, and ease of synthesis. Further studies are needed to optimize the synthesis conditions and to determine the adsorption capacity of the Schiff base for other heavy metals.