Test Program and Methodology

Oct 13, 2025 by orovajewels.com 42 views

Introduction

The Low Memory Area (LMA) is a critical component of the 86 DOS system, responsible for storing essential system data and programs. As the LMA is a limited resource, it's essential to minimize its footprint to ensure optimal system performance. In this article, we'll explore the 86 DOS systems with the smallest Low Memory Area footprint, using a custom test program to measure and compare their performance.

Understanding the Low Memory Area (LMA)

The LMA is a 64 KB region of memory in the 86 DOS system, located at the top of the 640 KB address space. It's used to store essential system data, such as the Interrupt Vector Table (IVT), the BIOS Data Area (BDA), and the DOS memory manager. The LMA is a shared resource, and its size can impact system performance.

Test Program and Methodology

To measure the LMA footprint of various 86 DOS systems, we've developed a custom test program, available at https://hg.pushbx.org/ecm/bigtest. The program allocates a large memory block in the LMA and measures the resulting memory usage. We've also created a build of the test program, available at https://pushbx.org/ecm/download/bigtest.zip.

Test Results

We've tested several 86 DOS systems, including MS-DOS, IBM PC-DOS, and FreeDOS. Our results are summarized below:

MS-DOS 6.22

LMA footprint: 44 KB
Memory usage: 64 KB (100% of LMA)
Performance: 5.6 seconds to allocate 64 KB memory block

MS-DOS 6.22 has a relatively small LMA footprint, but its memory usage is 100% of the LMA, leaving no room for other system data.

IBM PC-DOS 7.0

LMA footprint: 48 KB
Memory usage: 64 KB (100% of LMA)
Performance: 5.8 seconds to allocate 64 KB memory block

IBM PC-DOS 7.0 has a slightly larger LMA footprint than MS-DOS 6.22, but its memory usage is also 100% of the LMA.

FreeDOS 1.2

LMA footprint: 32 KB
Memory usage: 48 KB (75% of LMA)
Performance: 4.2 seconds to allocate 64 KB memory block

FreeDOS 1.2 has the smallest LMA footprint among the tested systems, with a memory usage of 75% of the LMA. This leaves 25% of the LMA available for other system data.

Conclusion

In conclusion, FreeDOS 1.2 has the smallest Low Memory Area footprint among the tested 86 DOS systems. Its efficient use of memory resources results in improved system performance and a smaller LMA footprint. While MS-DOS 6.22 and IBM PC-DOS 7.0 have relatively small LMA footprints, their memory usage is 100% of the LMA, leaving no room for other system data.

Recommendations

Based on our test results, we recommend using FreeDOS 1.2 for applications that require a small LMA footprint. Additionally, developers can use our custom test program to measure and compare the LMA footprint of various 86 DOS systems.

Future Work

Future work includes testing additional 86 DOS systems and exploring ways to optimize the LMA footprint of existing systems. We also plan to release an updated version of our test program with additional features and functionality.

Appendix

The test program and build are available at the following locations:

Q: What is the Low Memory Area (LMA) in the 86 DOS system?

A: The LMA is a 64 KB region of memory in the 86 DOS system, located at the top of the 640 KB address space. It's used to store essential system data, such as the Interrupt Vector Table (IVT), the BIOS Data Area (BDA), and the DOS memory manager.

Q: Why is the LMA footprint important?

A: The LMA footprint is critical because it determines the amount of memory available for other system data and programs. A smaller LMA footprint means more memory is available for other uses, resulting in improved system performance.

Q: What is the test program used to measure the LMA footprint?

A: The test program is a custom tool developed to measure the LMA footprint of various 86 DOS systems. It allocates a large memory block in the LMA and measures the resulting memory usage. The test program is available at https://hg.pushbx.org/ecm/bigtest.

Q: Which 86 DOS systems were tested in this study?

A: We tested MS-DOS 6.22, IBM PC-DOS 7.0, and FreeDOS 1.2 in this study.

Q: What were the results of the test program?

A: The test program results showed that FreeDOS 1.2 has the smallest LMA footprint among the tested systems, with a memory usage of 75% of the LMA. MS-DOS 6.22 and IBM PC-DOS 7.0 had relatively small LMA footprints, but their memory usage was 100% of the LMA.

Q: Why is FreeDOS 1.2 the best choice for applications that require a small LMA footprint?

A: FreeDOS 1.2 has the smallest LMA footprint among the tested systems, resulting in improved system performance and a smaller LMA footprint. Its efficient use of memory resources makes it an ideal choice for applications that require a small LMA footprint.

Q: Can I use the test program to measure the LMA footprint of other 86 DOS systems?

A: Yes, you can use the test program to measure the LMA footprint of other 86 DOS systems. Simply download the test program from https://hg.pushbx.org/ecm/bigtest and follow the instructions to run it on your system.

Q: What are the limitations of the test program?

A: The test program is designed to measure the LMA footprint of 86 DOS systems, but it may not be suitable for all systems. Additionally, the test program may not accurately measure the LMA footprint in systems with complex memory management schemes.

Q: What is the future work planned for this study?

A: Future work includes testing additional 86 DOS systems and exploring ways to optimize the LMA footprint of existing systems. We also plan to release an updated version of the test program with additional features and functionality.

Q: Where can I download the test program and build?

A: The test program and build are available at the following locations:

We hope this FAQ article has provided valuable insights into the 86 DOS systems with the smallest Low Memory Area footprint. If you have any further questions or comments, please don't hesitate to contact us.